Gaso 3364-F Triplex Plunger Pump

Manufacturer: Gaso
Model: 3364-F
Type: Used
Location: Louisiana

Gaso 3364-F Triplex Plunger Pump Details

Designed for high-pressure injection operations, particularly suitable for use in injection wells.

Key Specifications:

• Plunger Diameter: Minimum 1 1/4in - Maximum 2 1/2in
• Stroke Length: 3 inches
• Maximum Working Pressure: 3,300 PSI
• Rod/Piston Load: 4,370 lbs
• Barrels per Day: 3,278 BPD
• Gallons per Minute: 95.6 GPM
• Brake Horse Power (BHP): 55.2 HP

Pump Components:

• Crankshaft and Rod Assembly: From the second image, the crankshaft looks solid, showing the typical wear and oiling you would expect from a high-use pump. The visible bolts are safety-wired, indicating proper assembly to prevent loosening during operation.
• Plungers and Fluid Ends: In the first image, the plungers appear to be in fair condition. Any rust visible should be addressed as it can impact the life expectancy of the pump, particularly in high-pressure applications like injection wells.
• Power Unit: The motor label identifies it as a 10 HP motor with 230/460 volts and 60 Hz cycle frequency. This motor seems appropriate for powering this type of high-pressure pump.

Capabilities for Injection Wells:

• Max Pressure: 3,300 PSI, which is sufficient for injection operations requiring high-pressure fluid displacement.
• Max Flow Rate: 95.6 GPM at 55.2 HP, translating to about 3,278 barrels per day (BPD). This is more than adequate for typical injection wells.

**IMPORTANT BUYERS NOTICE**

All items are Sold AS-IS WITH NO WARRANTY expressed or implied. Items offered for sale may be damaged, inoperable and/or missing parts. We STRONGLY RECOMMEND a careful review of each photo and video and PERSONALLY INSPECT the item(s) before making a decision to purchase. Free Oilfield Quote IS NOT responsible for ANY missing or damaged equipment, part, item or accessory and shall not be held liable for any damage prior to or during the removal and/or delivery of the equipment. Any and all agreements contrary to the above disclaimer must be in writing and agreed upon up front and prior to any transaction.