(3) 54 MW Unused Siemens SGT-800 Gas Turbine (Package Deal)

Type: Unused

Condition: Excellent (NEW SURPLUS) - Turbines stored to Siemens recommendation.

Location: Europe

Note: This is a package deal and requires buyer to purchase all 9 units. POI and POF Required Upfront.

(3) 54 MW Unused Siemens SGT-800 Gas Turbine

Scope of Supply

This scope of supply forms a separate unit within the terminal points (utilities/consumables such as auxiliary power, fuel, water, washing detergent, instrument air, lubricating oil and grease are excluded). Alternative configurations are available.

Siemens’ model SGT-800 gas turbine Power Generation for Onshore applications comprises:

Gas turbine engine

Single shaft designed core engine with a nominal rating of 54 MW. The engine is arranged for cold end drive and meets electrical ISO conditions.

• Compressor inlet casing and inlet bellmouth casing.
• Two bleed valves for air bleeding during start up and shutdown.
• One annular third generation dry low emission combustion chamber including 30 low emission burners.
• Vibration probes of accelerometer type.

Combustion air inlet system

• Filter house with service platform and ladder.
• Two-sided pulse clean filter system with two filter stages, class F7 pulse filters as first stage and static class E10 disposable high efficiency filters as second stage.
• Support structure for filter house.
• Silencer.

Exhaust gas system

• Insulated axial exhaust diffuser with support.
• Stack height: 18 m above ground.
• Prepared for installation of diverter valve (diverter valve not included).
• Exhaust stack including bellows, transition piece and silencer with internal insulation.
• Base frame for gas turbine Gas turbine enclosure
• Enclosure for weather and noise protection equipped with ventilation, main and emergency lighting
• and external stairs & walkways.
• Left side maintenance opening, looking from exhaust towards inlet. Internal walkways.

Ventilation for gas turbine enclosure

• One-stage disposable barrier type air filter, class G4.
• Ducts in carbon steel.

Inlet and outlet are equipped with:

• Silencers Weather louvers Shut off dampers

Gas fuel system

• Internal gas fuel unit.
• Manual shut-off valve and pneumatically operated spring closing gas isolation valve.
• Y-type strainer with differential pressure measurement.
• Stainless steel piping downstream strainer.
• Ventilation valve to atmosphere.
• Leakage test of the ventilation & shut-off valves with pressure transmitter at start-up.
• Two spring closing, pneumatically operated quick shut-off valves with ventilation valve in between.
• AC servo motor operated primary gas control valve to the two primary gas manifolds.

Ignition system

• Main gas fuel used as ignition gas.
• Pressure regulator, shut-off and vent valves (solenoid operated).
• High energy spark plug for cross-ignition.

Starting system

• Static frequency converter-controlled AC electric start and barring motor with gearbox.
• Driver shaft with bearings and free wheel of SSS-type clutch.

Lubricating oil system

• System common for driver and driven equipment.
• Carbon steel tank with sub-merged oil heating.
• Three AC driven main pumps of centrifugal type, two in operation and one in standby mode. Fully automatic and bump less switch over to standby pump. Coast down can be made safely with a single pump in operation.
• Electrical motors fed via frequency converters. DC backup provided on all pumps by a 440V battery to the frequency converters. In case of failure in AC distribution, switch over to DC feeding is made automatically and without interruption.
• Oil mist filter with stainless steel casing.
• Piping downstream filter in stainless steel.
• Air cooled lubricating oil coolers of tube type.

Cooling and sealing air system

Instruments and components for standard cooling and sealing air system.

Washing and cleaning system

• Turbine compressor washing system.
• Water wash trolley.

Electric generator equipment

Electric generator

Four-pole synchronous AC generator of salient pole rotor type. Brushless excitation system with rotating rectifier and PMG for excitation power supply. Lubrication oil is supplied by the gas turbine package common system.

• 11 kV, 50 Hz and 1500 RPM.
• Power factor 0.8.
• Generator cooling IC6 A1 A6, TEAAC.
• Line and neutral cubicle
• Neutral earthing resistor.

Synchronizing equipment

• Automatic and manual (semiautomatic) synchronizing system for two circuit breakers: the generator circuit breaker and one additional breaker. 
• Frequency/load control.

Main gear and couplings

6600/1800 rpm speed reduction gear of double helical design. High speed quill shaft between gas turbine and speed reduction gear. Low speed quill shaft between speed reduction gear and electric generator.

Weather protection for electric generator

Weather roof over the electric generator. Material in carbon steel.

Auxiliaries 

Foundation

Anchor bolts for auxiliaries, such as stairs, platforms, coolers, fuel systems etc.

Gas detection system

• Enclosure provided with gas detection system to detect gas fuel leakages.
• Fire detection and extinguishing system
• Fire detection & extinguishing system for the gas turbine room.
• Central fire suppression unit for alarm and automatic extinguishing.
• Manual release buttons located outside each door of the gas turbine room.
• Extinguishant release audible and visible alarms.
• Extinguishant system distribution pipework, valves and nozzles.

Electrical and control equipment

Freestanding LER including indoor lighting, HVAC and external stairs and platforms. Separate UPS battery module.

Motor Control Centre

Motor Control Centre (MCC) including low voltage distribution of IEC 61439 form 4b and withdrawable unit design supplying all consumers, except starting system.

Control system

• Microprocessor based control, supervision and protection system with PC based operators’ station.
• Application software in controllers are battery backed-up for two months. License for control system programming included in operator station.
• Package protection system is built around a failsafe EC 61508 SIL proven safety controller.
• The critical signals work according to the principle of 1oo2.
• Main control and monitoring of the gas turbine contains systems and programs to perform both open and closed loop control. Main tasks are analogue and binary handling, sequencer for start & stop and gas turbine set supervision and monitoring.
• Gas generator speed and temperature control.
• PC and Windows 7 based operators’ interface with necessary software to operate the package in all operation modes. Rack type computer with redundant hot-swap, RAID controllers.
• Communication, hardwired interface and Modbus serial link and modem with standard scope of signals for communication with external computer system.
• UPS and motor drives
• UPS with MCB distribution board supplying uninterrupted power to instrument and control system. Automatic and bump less switch over between mains and back-up battery by static frequency converter.
• Common battery supply DC power to the UPS and UMD systems. Valve regulated lead acid 440 V DC battery including charger with temperature compensated charging voltage. Capacity for complete ten hours emergency cool down cycle and one-hour autonomy time for the UPS system.
• Lubricating oil emergency PLC used for pump control during UPS powered cool down.

ESTIMATED PERFORMANCE

• Power output54.0 MW(e)
• Fuel Natural Gas.
• Frequency50/60 Hz Gross efficiency38.86.0% Heat rate9,256 kJ/kWh
• Altitude0. m above sea level
• Barometric pressure:1.01325 bar
• Inlet pressure loss:9.00 mbar (at ISO & Base Load, total) Outlet pressure loss:5.00 mbar (at ISO & Base Load, total)

TERMINAL POINTS

Combustion Air: Inlet face to air inlet filter house

Exhaust: Exit from the gas turbine exhaust stack

Fuel: Inlet flange to the gas turbine on base fuel system (fuel to be supplied clean filtered and compliant to Siemens Specifications)

Cooling system: Water filling connection on the cooler header tank

Lube oil: Make up flange connection on the gas turbine on-base reservoir

Ventilation: Inlet/outlet grilles on unit enclosure

Drains and vents: On-base flange/connections lube oil vent outlets, gas vent

outlets

Electrical (HV):High Voltage outgoing terminals

Electrical (LV):LV power terminals on the auto-changer panel standby supply and junction box (external interfaces by others)

Control System: Control terminals on each junction box for external interfaces by others

Earth Grid: Earthing points located on and around equipment skids

DELIVERY

The 3 units are available for immediate shipment from the storage facility in Europe.

Unit availability is subject to prior sale and due to the versatility of these types of units the availability can change very quickly.

PRICING AND PAYMENT SCHEDULE

Pricing for the supply of the above-mentioned equipment. Pricing does not include any taxes duties or government charges. Any diversion from scope of supply as stated in this proposal will incur a price change.

All pricing is in United States Dollars

$225,200,000.00/ea.

Payment Schedule:

Buyer to Provide Project Site / Location / Name / For Non-Embargoed Country Verification

$2.5 million escrowed upon signing of purchase contract to secure the Equipment Inspection

Full Payment before shipping

All payments are to be made via electronic wire transfer.