Siemens SGT400 60hz Turbines

Type: New

Condition: Excellent

Location: USA

Siemens SGT400 60hz Turbines

The SGT-400 is a simple, robust twin-shaft gas turbine, suitable for both power generation and mechanical drive applications. The product services the 10 – 15 MW power band and can be used in all climates, onshore and offshore. A technological leap forward when it debuted 20 years ago, the SGT-400 continues to be a leader in operational and fuel flexibility, low emissions and overall efficiency. Enhancements to rotors and blades combined with local support and a 33% increase in the time between overhauls ensure high availability and low lifecycle costs. Recent advancements like the can-annular design with single-stage combustion mean the SGT-400 can burn a wide range of fuel compositions and run efficiently at all loads. It can meet stringent emissions standards while running loads as low as 30% and has seamless, true dual-fuel capability.

Highlights of the Siemens SGT-400 Gas Turbine

Extended availability with maximum reliability

Extended 32,000-hour hot gas path service intervals, up from 24,000 hours.

64,000 hours before first major overhaul, up from 48,000 hours.

Easier to own and operate

A large team of cross-trained field service technicians and engineers, 24/7 help desks and remote monitoring make the SGT-400 easier to own and operate over its entire lifecycle.

Fuel flexibility

Can burn many fuel types and qualities, including liquid fuels and gases with high inerts, thanks to controls technology. The engine, equipped with DLE burners, is capable to burn up to 10 vol% of hydrogen (H2). Equipped with diffusion burners with unabated NOx emissions, it can burn up to 65 vol% of hydrogen (H2).

Twin-shaft design

Ability to operate efficiently across a broader range of power – from 10 to 15 MW.

Better turn down and emissions compliance

Intelligent automatic adjustment of fuel split during starting and during operation to compensate load, ambient and fuel composition change to minimize emissions.

Ideal onshore or offshore for oil and gas industry

Compact dimensions, on-site or off-site maintainability, and high reliability. Can be used as direct drive for compressors or pumps, or for power generation. Onshore use in oil fields or refinery applications and offshore on platforms and FPSO vessels

Ideal for industrial power generation

Simple cycle or combined cycle applications and combined heat and power (CHP) uses.

Siemens SGT400 60hz Turbines for Sale

• Twin-shaft, industrial
• Power generation: 12.90 MW(e)
• Frequency: 60 Hz
• Electrical efficiency: 34.8 %
• Heat rate: 10,355 kJ/kWh at full load (9,815 Btu/kWh)
• Compressor pressure ratio: 16.8:1
• Exhaust gas flow: 39.4 kg/s (86.8 lb/s)
• Exhaust temperature: 555° C (1,031° F)
• Typical emissions: NOx <15>
• Medium-calorific value fuels capability (>25 MJ/Nm3 Wobbe index)

Important Buyers Notice: All items are Sold As-Is with No Warranty expressed or implied. Items offered for sale may be damaged, inoperable and/or missing parts. You are strongly urged to carefully review each photo and video as well as personally inspect the item before making a decision to purchase. Free Oilfield Quote is not responsible for any missing or damaged equipment, part, item or accessory and shall not be held liable for any damage prior to or during the removal and/or delivery of the equipment. Any and all agreements contrary to the above disclaimer must be in writing and agreed upon up front and prior to any transaction.